Urma Digiset 5 Technical Information

Urma Digiset 5 USERMANUAL Version 1.0 e

digiset 5 Urma AG, Switzerland www.urma.ch page 10 4.1.2 Assembling and setup of Digiset 5 1. Check the handwheel for the x-axes is dissassem-bl

digiset 5 Urma AG, Switzerland www.urma.ch page 11 6. Flip the Digiset to its normal horizonta posi-tion and mount the screen to the metal frame

digiset 5 Urma AG, Switzerland www.urma.ch page 12 4.2 Calibration of Presetter 4.2.1 Set the camera’s working distance The working distance is de

digiset 5 Urma AG, Switzerland www.urma.ch page 13 4.2.2 Check illumination After the working distance is checked, the homogeneity and brightne

digiset 5 Urma AG, Switzerland www.urma.ch page 14 3. If the greyscale lines are not horizontal you have to adjust the position of the light to t

digiset 5 Urma AG, Switzerland www.urma.ch page 15 4.2.3 Align camera When aligning the camera you must ensure that a known straight contour ru

digiset 5 Urma AG, Switzerland www.urma.ch page 16 4.2.4 Adjust X- and Z-Parallelity You access this operating mode using the following menu ste

digiset 5 Urma AG, Switzerland www.urma.ch page 17 4.2.5 Set absolute zero point You access this operating mode using the following menu steps:

digiset 5 Urma AG, Switzerland www.urma.ch page 18 5 Commissioning 5.1 Operating Digiset 5 In operational mode the 10.4" colour screen is div

digiset 5 Urma AG, Switzerland www.urma.ch page 19 5.1.1 Menu bar (Main menu) The menu bar represents the Digiset 5 main menu. There are up to tw

digiset 5 Urma AG, Switzerland www.urma.ch page 2 The information contained in this document may not be amended without prior notifi-cation. Urma

digiset 5 Urma AG, Switzerland www.urma.ch page 20 Output format Counter Axis 1 Ö Axis 2 Corrections Linear correction (1)

digiset 5 Urma AG, Switzerland www.urma.ch page 21 • If no measurement functions can be carried out correctly, the test LED will be red. Then the

digiset 5 Urma AG, Switzerland www.urma.ch page 22 5.2 Status field 5.2.1 Status and system information Display Description Upper toolbar for s

digiset 5 Urma AG, Switzerland www.urma.ch page 23 5.2.2 Various methods of displaying readings on the TCAM2 You access this operating mode using

digiset 5 Urma AG, Switzerland www.urma.ch page 24 5.3 Input by keyboard The TCAM2 has no keyboard . If you have to enter alphanumerical st

digiset 5 Urma AG, Switzerland www.urma.ch page 25 6 Configuration (software setup) 6.1 Info You access this operating mode using the following m

digiset 5 Urma AG, Switzerland www.urma.ch page 26 6.2 Imaging 6.2.1 Coordinate system (optional) The names of the vertical and horizontal axes of

digiset 5 Urma AG, Switzerland www.urma.ch page 27 6.2.3 Brightness (optional) In the "Black/White" operating mode the "Brightness&

digiset 5 Urma AG, Switzerland www.urma.ch page 28 6.2.5.2 Line deviation The line deviation parameter gives the maximum permissible deviation of

digiset 5 Urma AG, Switzerland www.urma.ch page 29 6.4 Output format You access this operating mode using the following menu steps: Main menu

digiset 5 Urma AG, Switzerland www.urma.ch page 3 Table of contents 1 IMPORTANT NOTES _______________________________________________ 5 1.1 DELIVE

digiset 5 Urma AG, Switzerland www.urma.ch page 30 6.5 Measuring systems It is possible to configure all signal inputs separately. The third axis

digiset 5 Urma AG, Switzerland www.urma.ch page 31 6.6 Corrections 6.6.1 Linear correction (optional) You access this operating mode using the fol

digiset 5 Urma AG, Switzerland www.urma.ch page 32 6.7 Options This operating mode gives you the option of setting specific system settings so tha

digiset 5 Urma AG, Switzerland www.urma.ch page 33 6.9 Date and time (optional) Requirement for this operating mode is the clock module (hardware

digiset 5 Urma AG, Switzerland www.urma.ch page 34 7 System 7.1 Tool references The 0 (zero) tool reference is fixed. Furthermore, the system giv

digiset 5 Urma AG, Switzerland www.urma.ch page 35 7.1.2.2 Delete tool references After selecting the "Delete" operating mode the corres

digiset 5 Urma AG, Switzerland www.urma.ch page 36 7.2 Tools The system offers you the opportunity to save and manage up to 1000 tools. 7.2.1 Sel

digiset 5 Urma AG, Switzerland www.urma.ch page 37 7.2.2.2 Delete tool After selecting the "Delete" operating mode the corresponding too

digiset 5 Urma AG, Switzerland www.urma.ch page 38 7.3 Tool list You access this operating mode using the following menu steps: Main menu Su

digiset 5 Urma AG, Switzerland www.urma.ch page 39 7.4 Post processor-measurement series (optional) You access this operating mode using the follo

digiset 5 Urma AG, Switzerland www.urma.ch page 4 6.7 OPTIONS _____________________________________________________ 32 6.8 PASSWORD ______________

digiset 5 Urma AG, Switzerland www.urma.ch page 40 7.4.3 Interrupt Storing further data records in the PP measurement range is interrupted. All da

digiset 5 Urma AG, Switzerland www.urma.ch page 41 8 Imaging For each measuring procedure ensure that the edges of the object to be measured are n

digiset 5 Urma AG, Switzerland www.urma.ch page 42 8.2 Measuring methods 8.2.1 Fixed axis Here all measurements relate to the original cross hair

digiset 5 Urma AG, Switzerland www.urma.ch page 43 8.2.2 Maximum The measuring lines are created on the contour of the object to be measured. Both

digiset 5 Urma AG, Switzerland www.urma.ch page 44 8.2.3 Preset The measuring lines are created on the contour of the object to be measured. Both

digiset 5 Urma AG, Switzerland www.urma.ch page 45 8.2.4 Measure centre Here the TCAM2 determines the edge pixel next to the cross hair origin poi

digiset 5 Urma AG, Switzerland www.urma.ch page 46 8.3 Measuring procedures 8.3.1 Principal procedures in contour analysis Digiset 5 has two main

digiset 5 Urma AG, Switzerland www.urma.ch page 47 8.3.2 Detailed description of measuring procedures 12 detailed measuring procedures have been d

digiset 5 Urma AG, Switzerland www.urma.ch page 48 8.3.2.1 "Line 1" measurement (L1) Line 1 is determined. (Light to dark border counte

digiset 5 Urma AG, Switzerland www.urma.ch page 49 8.3.2.5 "Line 1 - Point X" measurement (L1 - PX) The vertical axis is touched at one

digiset 5 Urma AG, Switzerland www.urma.ch page 5 1 Important notes 1.1 Delivery schedule The Digiset 5 imaging system is supplied with the follow

digiset 5 Urma AG, Switzerland www.urma.ch page 50 8.3.2.9 "Line 1 -Line 2" measurement (L1 - L2) The intersection point of both measur

digiset 5 Urma AG, Switzerland www.urma.ch page 51 8.4 Measuring programs / Measuring functions You access this operating mode with the "Meas

digiset 5 Urma AG, Switzerland www.urma.ch page 52 8.4.2 Angle The "Angle" measurement function is used to measure visually the angle be

digiset 5 Urma AG, Switzerland www.urma.ch page 53 9 Index Adjustment bars 20 Analysis window 21 Auxiliary line 21 Baud rate 28 Brightness 27

digiset 5 Urma AG, Switzerland www.urma.ch page 54 10 Appendix 1 / Password 111111 Password/ Factory setting

digiset 5 Urma AG, Switzerland www.urma.ch page 6 1.2 Purpose The Digiset 5 is a standalone, complete imaging system for automatic measuring of co

digiset 5 Urma AG, Switzerland www.urma.ch page 7 2 Safety instructions 2.1 General safety instructions The following instructions must be careful

digiset 5 Urma AG, Switzerland www.urma.ch page 8 3 Compatibility statement Manufacturer: Urma AG, Werkzeugfabrik Obermatt 3

digiset 5 Urma AG, Switzerland www.urma.ch page 9 4 SETUP INSTRUCTIONS 4.1 Unpacking and start up The device is delivered in a wood box. The tra